GO24

GO24* is a complete suite of integrated software tools for steering horizontal and highly deviated wells.

GO24 operates both with real-time data streams and in disconnected mode. It is designed to deal with various complexities using the logging and measurements taken while drilling (LWD/MWD). It maximizes the efficiency of geosteering by integrating all the necessary data with the correlation and modeling tools. You can steer a well with confidence either by using a single gamma-ray log or a full set of LWD measurements.

GO24 is logical and practical. For example, its drilling interface provides a cross-section of the subsurface model along the planned horizontal well, the horizontal panel with observed and synthetic logs, and a vertical panel with the logs and markers from the offset well—all in one integrated display!


GO24 Window Screenshot

Geosteering Scenario

The geologist will load the following data into a project to prepare a geosteering model:

  • Offset wells: header, logs, trajectory, markers, fluid contacts. Note: GO24 supports multiple offset wells in a project.
  • The planned well header and trajectory.
  • Any 3D structural surfaces delineating the subsurface.

All the data loaded can be quality controlled, and corrected if necessary, in spreadsheets or graphically in GO's Well Correlation, Map or 3D windows.

Well Correlation window
Well Correlation window

Well log data from the offset well is posted in the vertical track for correlation to the depth domain. Next, a geologist creates the geosteering scenario. A scenario is based on the subsurface model with log properties derived from the offset well logs along the selected structural surfaces. Such a model provides the prediction of the LWD measurements—synthetic logs.

The synthetic logs are displayed in the horizontal track showing the scale of the planned well trajectory.

Geosteering scenario. Color code: from Low GR – bright (sand) to high GR dark (shale).

Via a URL link provided by the logging operator, the geologist will establish WITSML connectivity to the future real-time data stream. It is also possible to load the LWD logs via data files. Newer data can be appended to previously loaded data.

Geosteering in Real-Time

While drilling, actual LWD/MWD data is streaming into the GO24 software. The data will be displayed in the horizontal track in the Scenario window. The synthetic logs are automatically calculated along the actual trajectory.

The geologist will compare the actual and synthetic logs. A match suggests the correctness of the geological model. A mismatch of the logs requires a correction to the model. The geologist will interactively correct the model by adjusting the dips and/or depths of the formation surfaces, either via bulk shifts or segment by segment. Any such correction instantaneously updates both the subsurface model and the synthetic logs so the geologist can reevaluate the borehole position in real-time. Based on the evaluation, the geologist can recommend trajectory corrections to the drilling crew. In the example below, a 0.3° dip correction was applied to correct the subsurface model. The borehole remains in the zone and requires less upward steering than could have been suggested without using GO24.

 

A 0.3 degree dip adjustment provides both synthetic and actual GR log matching. The corrected subsurface model allows for more accurate drilling recommendations. In this example, it reduced oversteering and trajectory tortuosity.

A geosteering geologist can also predict the drilling bit location with the built-in planning tool.


Planning ahead tool - Projection to the bit.

Geosteering with LWD Borehole Images

Any available real-time log data can be utilized in GO24 including mud logs and borehole image logs.

You can easily load multiple image logs, format them for better visualization, and choose formation dips. The formation dips in the chosen cross-bedded features are automatically displayed on the geosteering cross-section for more accurate structural updates.

Combining the synthetic logs with the information about the formation dips clarifies the structure behavior and therefore reduces the uncertainties of the geosteering decisions.

 

Dip picking on LWD image log in real-time.

The red segments in the cross-section represent formation dips chosen from the upper track of the image log.

3D Structural Model Update

GO24 allows you to update 3D structural surfaces while you are drilling.

Conventional structural modeling is based on the data derived from wells penetrating modeled structures. GO24 provides an easy to use functionality that allows you to easily apply such predictive corrections to the structural surfaces without crossing the bottom layer of the reservoir zone. GO24 uses the corrected surface segments to update the structure surfaces in real-time. Geologists can use either the 3D or the Map Windows for comprehensive data visualization and manipulation. A surface modification procedure can be performed anytime during the drilling to get accurate structure information at that moment or to get the final 3D structure after the well has reached TD. The updated surfaces obtained by using GO24 can be easily exported back to the geological model in any geomodeling software.

In our geosteering scenario, we performed a structure correction to fit the model to the LWD data. The corrected surface segment was then used to update the reservoir top surface for future reservoir modeling.

 

A 3D view of the reservoir structure before (top) and after (bottom) a correction. The red zone on the cross-section represents the difference in surface position (additional reserves) suggested while drilling.

Other Useful Features

Autosaving

All project data and canvases are saved automatically. This helps to avoid data and time losses while drilling.

Universal data import/export

GO24's universal data loader automatically recognizes and imports survey and log data in commonly used formats without preliminary editing, including LAS and DLIS for well logs.

Structural surfaces can be imported and exported in CPS-3 or IRAP classic grid formats.

Geosteering report

The GO24 software generates automatic reports with recorded recommendations for drilling, selected snapshots of the data, and geosteering scenarios.

Petrophysical Calculator

Using free-format formulas, a geologist can introduce derived logs and evaluate reservoir properties while drilling using GO24.

Key Benefits

Hundreds of successful wells have proven GO24 to be:

  • Robust. All the functionality you need is in one package.
  • Reliable. GO24 has been tested on a variety of workstations and laptops. GO24 features an auto-save function and is regularly updated with software fixes and enhancements.
  • Fast. GO24 gives you truly real-time performance.
  • User-Friendly. GO24 was created by geosteering geologists for geosteering geologists.
A geosteering section in 3D

ADAGA Solutions Ltd. is the official distributor for GO24 software in Canada and the US.

*GO24 is also known as the Geosteering Office software on the Russia and Central Asia market.

Request demo

Adaga Solutions Ltd +1 (403) 399 3035, inbox@adaga.ca